Snap-Tite 6C & 3C Series Check Valves
Snap-Tite S6C / 3C Series單向閥
Soft Seat In-Line Check Valves Up to 2” Size, Steel / Stainless, Male and Female Fitting Ends - S6C / 3C Series


S6C / 3C Series可提供閥座（幾乎零泄露），導向提升閥等，他們具有多種終端連接、彈性密封和316不銹鋼結構，所以該產品可用于多種系統。此外， Snap-tite 6C & 3C Series單向閥在最高工作壓力下6000 PSI / 414Bar下安全系數設定為4:1，因此應用更加廣泛。

Parker Snap-tite 6C & 3C Series單向閥

特點和優勢

- 提升閥 軟密封
- 碳鋼或不銹鋼結構；也可提供其他材質
- 流速達175GPM,662L/M
- 可提供SAE、NPSF、NPT、BS2779和ORS等連接形式
- 工作壓力可達6000PSI ; 尺寸 1/4’’ 、3/8’’、 3/4’’和1’’
- 工作壓力可達3000 psi 尺寸 1-1/4’’、1-1/2’’和2’’

用途
- 泵口和蒸汽應用
- 增壓壓縮機
- 冷卻水
- 空氣干燥器和儀表空氣管線
- 燃料儲存罐

SNAP-TITE S6C & 3C Series Check Valves
SNAP-TITE S6C and 3C Soft Seat Check Valves

SNAP-TITE S6C and 3C check valves have a variety of options enabling them to meet the needs of most systems. The soft seated poppet creates a leak free seal to protect hydraulic systems from reverse flow.

S6C check valves are stainless steel with a rated pressure of 6000 psi (sizes 1/4”, 3/8”, 1/2”, 3/4” & 1”). 3C check valves are steel with a rated pressure of 3000 psi (sizes1-1/4”, 1-1/2” & 2”).

These in-line unidirectional valves are available in sizes 1/4” to 2”. Standard spring crack pressures are shown in the part number table. Other crack pressures available upon request.

SNAP-TIE S6C Series Part Numbers

S6C4F-F*
S6C4F-M*
S6C4M-M*
S6C6F-F**
S6C6F-M*
S6C8F-F*
S6C8M-F*
S6C8M-M*
S6C12F-F*
S6C16F-F*
3C Series Part Numbers
3C20F-F**
3C20EF-EF**
3C20EM-EM**
3C24F-F**
3C24EF-EF**
3C32EF-EF**

PARKER派克單向閥

- 派克PARKER Snap-Tite 6C / 3C 內置單向閥
- 派克PARKER Snap-Tite CAC液控單向閥
- 派克PARKER Snap-Tite CAD雙液控單向閥
- 派克PARKER Snap-Tite CAV單液控單向閥
- 派克PARKER Snap-Tite CPIFF直通單向閥
- 派克PARKER Snap-Tite CPC插裝式單向閥
- CV系列 內置單向閥 3000 PSI
- DV系列 內置單向閥 5000 PSI

Snap-Tite S6C and 3C Series Check Valves (up to 6,000 psi) are soft seat, zero leakage poppet check valves with a two piece construction. The two piece construction allows for a variety of end fitting combinations.

Snap-Tite check valves have various standard crack pressures and flow rates up to 175 gpm. The S6C & 3C Series valves are available in a range of sizes and steel or stainless steel materials for flow capacities up to 175 gpm.

Snap-Tite Check valves are important components that are often overlooked when building a fluid system. A check valve can optimize system performance in the following ways:
- Ensure hydraulic fluid flows in only one direction
- Eliminate potential damage from back pressure
- Isolate sections of a system or system components

Basic check valve construction consists of a valve body with an inlet and an outlet port. Inside, a moveable poppet valve is controlled by spring pressure. In most cases the valve is normally closed, opening when the fluid pressure is greater than the spring force (crack pressure), thus allowing the fluid to flow in only one direction. When reverse flow attempts to enter though the outlet the poppet closes and flow through the valve is stopped.

Soft seat check valves have an O-ring or similar elastomeric seal between the poppet and body for improved leak resistance. The soft seat design is most compatible with ""clean” systems and is not indented for use in systems that have high surge flow. The seal material dictates the temperature range of the valve.

Snap-Tite Technical Characteristics:
- Sizes: 1/4”to 2”
- Materials: Steel, Stainless Steel, Brass
- Seal Material: Fluorocarbon
- Standard Crack Pressures (psi): 5, 15, 25, 65
- Inlet Port Ends: Male NPT, Male 37 degree flare, Male Face Seal, Female NPTF, Female SAE, Female British Parallel BS 2779
- Outlet Port Ends: Male NPT, Female NPTF, Female SAE, Male SAE 37 degree Flare, Male Face Seal, Female British Parallel BS 2779
- Optional crack pressures available
- Orificed valve option
- Custom shapes and configurations

Note: Some options may not be standard configurations. Please contact the Quick Coupling Division for availability and delivery.

Markets:
- Industrial
- Construction
- Agriculture
- Transportation
- MRO

Features/Benefits:
- Allows the fluid to flow in only one direction, protecting the system from fluid back pressure
- Soft seated valve creates a leak free seal
- Fluorocarbon seal is standard
- Optional crack pressures are available on request
- Optional orificed valve allows metered flow when the valve is closed. Orifice bore size is determined by application requirements.
- Custom shapes and configurations can integrate special features to reduce the number of components and potential leak points in a system

Applications:
- Industrial, mobile, and construction equipment
- Restrictor Check Circuit
- High/Low Pump Circuit
- Slow Advance/Rapid Return Circuit
- Oil Cooler By-Pass Circuit
- Sequence Circuit
- Pilot Pressure Circuit
- Accumulator Circuit